DIY This Trendy Geometric Pendant Lamp

DIY a Geometric Brass Pendant Lamp

Save money on those pricey high end home decor store pendant lights and make your own with this easy tutorial. With just a few simple supplies you can design and create your own for a fraction of the price of store bought. Customize your size and shape to craft this perfect illuminated accent piece for your space!


DIY Geometric Brass Pendant Light

What You'll Need:

  • Thin brass pipe (available at craft stores)
  • Wire
  • Wire cutters
  • Pipe cutter
  • Hanging light kit

Instructions

DIY Geometric Brass Pendant Light

Step 1: Layout and design your light. Here we made a pentagon shape. For this design you will need one very short piece, 2 smaller pieces, a medium sized piece, and a large piece. Mark out your cuts on your pipe.

DIY Geometric Brass Pendant Light

Step 2: Use the pipe cutter to cut your pieces. You will need 5 of each.

DIY Geometric Brass Pendant Light

Step 3: Finish cutting your pieces and set each pile of sizes to the side.

DIY Geometric Brass Pendant Light

Step 4: On a large flat surface, layout your pattern. You will need a small pentagon to start at the bottom with a larger pentagon in the mid section and the smallest pentagon at the top.

DIY Geometric Brass Pendant Light

Step 5: Use wire to put together the bottom pentagon. Thread one piece through all 5 piece and twist to connect the pentagon back together. Cut off the ends of the wire.

DIY Geometric Brass Pendant Light

Step 6: Repeat step 5 with the larger and smaller pentagons that will make up your tiers.

DIY Geometric Brass Pendant Light

Step 7: Cut another piece of long wire. Wrap it around one of the corners of the bottom pentagon. Twist the pieces together and thread on one of the smaller mid section pieces.

DIY Geometric Brass Pendant Light

Step 8: Thread the wire around the middle pentagon.

DIY Geometric Brass Pendant Light

Step 9: Thread on the longest piece and thread the wire around the smallest pentagon that will be at the top.

Step 10: Cut the end of the wire after wrapping around the corner of the top pentagon and thread the small end of the wire through one of the top pentagon edges. Repeat steps 7-10 for the rest of the 4 points of the pentagon.

DIY Geometric Brass Pendant Light

Step 11: Once your pendant is put together, thread the pendant light kit up through the top and hang on a hook in the ceiling. Adjust the height for your space!

DIY Geometric Brass Pendant Light

DIY Geometric Brass Pendant Light

DIY Geometric Brass Pendant Light

DIY Geometric Brass Pendant Light


MORE MUST-CLICKS:

DIY These Wire Baskets for All Your Storage Needs

Craft a DIY Southwest-Inspired Pillow for Fall

A Custom Mid-Century Inspired Side Table You Can DIY