Quick and Simple DIY Copper Napkin Rings

Repurpose copper pipe fittings into modern napkin rings!

DIY Copper Pipe Napkin Rings

Keep your next dinner party on a budget with these fun and easy copper pipe napkin rings. In three easy steps, you can turn a few hardware store fittings into a bright and modern accent for your party table! The cohesive look of matching rings can unite mismatched linen napkins. Or use these with paper napkins and plastic ware for your impromptu backyard party to add a little something extra without over doing it. A super easy project with so many possibilities!

DIY Copper Pipe Napkin Rings

What You'll Need:

  • Four 1 to 2" round copper pipe fittings, 2" in length
  • Pipe cutter (make sure that it is large enough to accommodate you pipe diameter)
  • Tape measure
  • Painter's tape
  • Sandpaper

DIY Copper Pipe Napkin Rings

Step 1: Measure and mark your pipe (if it had a price sticker on it, remove it with hot soapy water first). Here we cut our rings to 1" in length. In order to avoid sharpie marks that can't later be removed, we used painter's tape to mark our measurement.

DIY Copper Pipe Napkin Rings

Step 2: Cut your pipe with your pipe cutter along the taped off line.

DIY Copper Pipe Napkin Rings

Step 3: Sand the edges of the pipe where you cut it with fine grit sandpaper to even and smooth out the edges. This will make it much easier to slide your napkins in and out without snags!

Your rings are now ready for your napkins!

DIY Copper Pipe Napkin Rings

Use them any season with any style or color of napkin. If you get bored later, add a couple coats of a bold colored spray paint to give them a new life!

DIY Copper Pipe Napkin Rings

MORE MUST-CLICKS:

DIY Copper Curtain Rods for Your Home

A Wire Basket DIY to Keep You Organized

DIY Succulent Place Card Holders